To clean the sensors on a robot vacuum, you can use a compressed air duster to blow off any dirt or dust that may be blocking the sensor.
The sensors are located on the bottom of the Roborock S5. This allows the robot to scan and map the environment as it cleans.
The Roborock S5 comes with a water tank and a mopping cloth. You can use the water tank to clean the Roborock. To open the Roborock, you need to remove the water tank.
To clean the Roborock vacuum, you need to remove the dustbin and wet mop the inside. You can also use a vacuum cleaner to clean the filters.
The sensors are located on the bottom of the Roborock. This allows the robot to map its surroundings and avoid obstacles.
To clean a Deebot sensor, you can use a soft cloth to wipe it down. If the sensor is dirty or covered in dust, you can use a vacuum cleaner to remove the debris.
The strainer on the Roborock is a small, circular screen that sits at the bottom of the dustbin. It helps to keep large pieces of debris from clogging up the suction nozzle and affecting the performance of the robot vacuum.
There are a few possible reasons why your Roborock might be smelling. One possibility is that the dustbin is full and needs to be emptied. Another possibility is that the filter needs to be replaced. If neither of those solutions solves the problem, then it might be that there’s something wrong with the machine and you should contact customer service.
The Roborock S5 Max comes with a removable water tank and a mop pad. To clean the robot, detach the water tank and use a brush to clean the inside of the tank. Then, use a damp cloth to clean the outside of the tank. Next, remove the mop pad and soak it in warm water. Finally, wring out the mop pad and let it air dry.
To mop with Roborock, you will need to fill the water tank with clean water, add the cleaning solution of your choice, and attach the mop head. Once you have done that, you can press the power button to turn on the robot. To start mopping, press the “Start Mopping” button on the top of the robot.
There are a few ways to service the Roborock S5. One is to open the bottom and remove the dustbin and filters. You can then clean them and put them back. Another way is to open the app and go to Settings > Device Maintenance > Cleaning History. You can then select the type of cleaning you want to do, such as carpet, hardwood, or tiles.
